The optional DNC 60 is designed for multi application purposes. Depending on which software it is equipped, the DNC 60 can be used for synchronized or non-synchronized pressbrakes, with up-stroking or down-stroking ram and shears. The ease of programming allows the machine builder to configure all axes, inputs/outputs and auxiliary functions according to his needs.

The DNC 60 numerical control can control up to 4 digital axes and many auxiliary functions. A backlight LCD display (130x75mm) as well as a simplified keypad with large keys provide a high comfort of use comparable to a high level numerical control.

The CYBELEC knowledge offers with this new numerical control a quick programming appreciated by all machine operators.

The DNC 60 is designed to be easily integrated in a control panel or in the electrical cabinet. Well designed, the housing protects the control electrically and mechanically and has its own mounting hardware.

The DNC 60 holds all the electronic components on one single card using the SMD technology. The FLASH memory permits, optionally, to update the software via the RS232 link. Simple commissioning as well as one single 24VDC-power supply reduce considerably the installation and cabling costs.

Developed on a single board with SMD, ASIC and multiprocessors, this DNC gives the operator the performance and reliability he always wanted.

An internal backup lets the operator restore manufacturer settings onto the press-brake at any time. This grants the press-brake owner a higher level of confidence.

The keyboard with it's large keys allows the operator to program with handgloves.

Up to 11 languages are available on the DNC 60.