Saturday March 25, 2023
Call Allsteel Today (514) 453-3223

Tank Head Shapes and Types

 

Standard & A.S.M.E.® Tank Heads For Industry

 

We manufacture tank heads in many different configurations from 4" to 275" in diameter.

We form carbon, stainless, aluminum, and many other exotic materials using the finest head making equipment available today.

 

2:1 Semi-Elliptical Tank Heads

Sizes 6-5/8 to 192 inches in diameter. From 3/16 to 2 inches thick. Tolerances comply with ASME EG 32 (d). I.D. or O.D.

* Volume (US gal) V = .000586 D3
( D = ID in inches )

ASME Flanged & Dished Tank Heads

Standard and intermediate sizes 14 to 250 inches. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME requirements. ASME UG-32 (e) I.D. or O.D.

* Volume (US gal) V=.000346 D3
( D = ID in inches. )

ASME 80-10 Flanged & Dished Tank Heads

Sizes 14 to 240 inches in diameter. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME 1-4 (d). I.D. or O.D.

* Volume (US gal) V=.000488 D3
( D = ID in inches. )

ASME High Crown Flanged & Dished Tank Heads

Standard and intermediate sizes between 14 to 248 inches in diameter. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME requirements. I.D. or O.D.

Flanged & Conical Dished Tank Head

From 24 to 240 inches in diameter. From 3/16 to 1-1/8 inches thick. Tolerances comply with ASME requirements. ASME UG-32 (h). I.D. or O.D.

Standard Flanged & Dished Tank Heads

Sizes 14 to 260 inches in diameter. From 12 gauge to 1-3/8 inches thick. Non-ASME I.D. or O.D.

* Volume (US gal) V=.000263 D3
( D = ID in inches )

Flanges & Shallow Dished Tank Heads

From 14 to 260 inches in diameter. From 3/16 to 1-3/8 inches thick. Non-ASME I.D. or O.D.

Flanged Only Tank Heads

Sizes 14 to 300 inches in diameter. From 12 gauge to 1-1/4 inches thick. Non-ASME I.D. or O.D.

Dished Only Tank Heads

When ordering, specify most important dimensions- outer diameter, crown radius, or depth. Standard and intermediate sizes 12 to 275 inches in diameter can be readily supplies. From 12 gauge to 3 inches thick.

* Volume (US gal) V=.000233 D3
( D = ID in inches ) ( DR = ID )

Flared & Dished Tank Heads

From 18 to 144 inches in diameter. From 12 gauge to 5/16 inches thick. Tolerances comply with ASME requirements. ASME 1-6.

* Volume (US gal) V=.000233 D3
( D = ID in inches ) ( DR = ID )
back to top

Allsteel Tank Head Press

Previous Next
  • 1
  • 2
Tank Head Press
The Unique Allsteel Tank Head Press While the ALLSTEEL name is famous for our renowned line of pres Read more
Tank Head Press Technology
The Allsteel Tank Head Press provides the capability to produce 3 specific types of heads:   The A Read more
PLC & Hydraulics
High performance multi-pump hydraulic system, micron filtration and oil cooler, self-monitoring capa Read more
Our Advantage
The ALLSTEEL Dish Forming Press are robust, durable, and easy to operate with low maintenance costs. Read more
One Hit Precision Blank
Capital Cost Highest Tooling Hardened Inserts For Top & Bottom Dies Tonnage H Read more
One Hit Rough Blank
Capital Cost Medium Tooling Less Expensive Top & Bottom Dies Tonnage Medium Read more
Dishing Only Rough Blank
Capital Cost Lowest Tooling Lowest Cost (Top Die Only/No Bottom Die) Tonnage Lowe Read more
Tank Head Shapes and Types
  Standard & A.S.M.E.® Tank Heads For Industry   We manufacture tank heads in man Read more
Dish Press Comparison
THE ALLSTEEL AIR DISHED HEAD PROCESS   • This process requires heads to be dished only with a Read more

Allsteel Tank Head Press Customers

Boston Steel
BOSTON tanks are easy to maintain because they stand up to your tough schedules. Premium materials a Read more
Empresas Randon
Empresas Randon are national market leaders in the segments they act, references in technology and q Read more
Mid-State Tank Co.
This well established manufacturer of stainless steel and aluminum tanks and water tanker trucks for Read more
Walker Stainless
In early May 2008, ALLSTEEL completed the successful installation and start up of the largest Dishin Read more

S5 Box