Featured model: Allsteel Maxi 1/4 X 10' Guillotine Design
High performance hydraulic system provides extra-high cutting speeds when working at 2/3's or less of machine capacity. Strokes per minute are increased 50% without any increase in machine horsepower. Variable cut length feature increases productivity when shearing pieces less than full bed length. Overhead mounted hydraulic system provides easy access for maintenance, service and for mounting accessories such as conveyors and part stackers.
Allsteel Go To Control
The ALLSTEEL GOTO back gauge is servo driven for fast positioning (400 in/minute) and superior accuracy (repeatability is guaranteed +/- 0.001"). The system also allows:
· One key calibration.
· On key inch/metric selection.
· A retract position to allow cutting sheets larger than the nominal back gauge range.
· An automatic withdraw that moves the gauge bar back 0.1" on every cut which ensures clearance.
Backgauge Design
· GOTO style motorized disappearing back gauge, with in/mm electronic readout.
· Shadow cutting line.
· Full length hardened slides.
· Nonmetallic ways.
· Ram tension adjustment.
· Blade clearance adjustment.
· Cut length adjustment.
· Individual hydraulic hold down pistons with replaceable polyurethane shoes.
· Hold down force adjusts automatically with thickness being cut.
· Squaring arm with recessed in/mm scale with embedded squaring bar.
· Work support arms 22" long.
· Four edge blades high chrome, high carbon top & bottom.
· High perform overload protected hydraulic drive.
· Full electrics with motor, overload protected magnetic motor starter, circuit breaker disconnect with 120v controls.
· Mode selector switch.
· Remote foot switch control.
· Ram up push button.
· Hand slots with beveled edges in table.
Allsteel press brake & shear service
